Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Arlington?
A new garage door in Arlington, TX typically costs between $700 and $2,200 installed in 2026, while common repairs like spring replacement run $180 to $340. Most homeowners spend $150 to $600 on repairs, and opener installation lands between $250 and $550. These are the real numbers families in Arlington pay, and the exact figure depends on door size, material, insulation, and which parts have worn out.
At Fernbrook Garage Doors Fort Worth, we put the price in writing before any work begins, so the number you hear on the phone is the number on the invoice. No surprise add-ons, no “while we’re here” upselling. Just a straight answer, delivered before we touch a single bolt.
Garage Door Cost Breakdown (2026)
Here’s what Arlington homeowners can expect to pay for the most common garage door services this year. These ranges reflect parts and labor for a standard two-car garage in the Arlington market.
| Service | Typical Arlington Price Range |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2,200 |
| General Garage Door Repair | $150 – $600 |
Three things move these numbers, and they move them consistently.
Door size. A single-car door costs less to replace than a double, but it also uses shorter springs and lighter panels. A 16-foot double door in a newer Arlington home near Lake Arlington or the Viridian will sit at the higher end of the spring and panel ranges because the springs carry more tension and the panels cost more per section.
Material. Steel is the most common and most affordable, starting around $700 installed. Aluminum runs slightly higher and shows up on homes in southwest Arlington where a lighter door means less strain on older openers. Wood and wood-look composite doors start around $1,400 and can push toward $2,200 depending on finish and glass work. Insulation adds $150 to $400 whether you choose steel or aluminum.
Labor complexity. Some jobs are simple swaps. Others run into what’s already there. If the tracks were installed at a slight angle in a 1990s-era garage in east Arlington, the fix takes more time and the track realignment price moves toward $240. If the opener needs new wiring and a new rail plus labor, the installation lands near $550.
What Affects Garage Door Pricing in Arlington
Arlington isn’t one market, and anyone who says every home here prices the same hasn’t worked across the city. Here’s what actually changes the bill.
- Soil movement and foundation settling. Arlington sits on clay-heavy soil that shifts with drought and rain. This is especially true in neighborhoods like Dalworthington Gardens and the older streets off Park Row, where the ground has moved enough over the years to pull garage door tracks slightly out of square. Realignment or a fresh track install costs more when the framing has shifted behind it.
- Heat and humidity on moving parts. Arlington’s summers push 100 degrees and the humidity stays high from May through September. Rollers and hinges in unconditioned garages wear faster here than in drier parts of Texas. A roller replacement in an attached garage with no ventilation typically runs $150 to $220, toward the higher end because the shafts often need cleaning and lubricant replacement at the same time.
- Glass and window inserts. Homes in north Arlington neighborhoods like the Highland Park of the mid-cities, or the newer builds around the Lake Arlington shoreline, often feature decorative glass panels in the upper section of the door. Replacing a cracked window insert adds $120 to $300 to a panel replacement depending on the pattern and whether it’s insulated.
- Opener age and wiring. Arlington homes built before 2000 often have openers alongside aging wiring and no dedicated circuit. In places like the Greek Revival and ranch-style homes around UTA, an opener replacement runs $150 to $300 more when we’re also replacing corroded wiring or adding a surge protector to the outlet.
- Homeowners association requirements. Several Arlington HOAs, including those covering subdivisions off Green Oaks and Matlock, have specific rules about door color, panel style, and carriage trim. If your door faces the street, the replacement cost can rise 10 to 20 percent to meet the required aesthetic. It’s worth checking before you pick a panel style.
- Garage condition and access. If the garage is packed floor to ceiling and has a side entrance blocked by a freezer, the work takes longer. We don’t charge differently for a cluttered garage, but we do ask before moving anything. In homes where a dog crate occupies the corner near the tracks, our technicians will ask before touching it so the family’s routine stays intact.
How to Save on Garage Door
The cheapest garage door repair in Arlington is the one you schedule before a small issue becomes a big one. A cracked roller costs $110 to replace. A cracked roller that snaps and lets the door drop can damage a panel, cost $500, and leave the car trapped in the garage. Here are practical ways families in Arlington keep costs down.
Lubricate before the heat builds. Lay a light silicone-based lubricant on the rollers, hinges, and torsion springs twice a year: once in March, once in September. In Arlington’s climate, every six months is the sweet spot. Less friction means longer part life. Use pet-safe products if you have animals, since garage floors are where dogs lie down after a walk.
Request a spring inspection once a year. A torsion spring under a double door in Arlington holds enough tension to require a trained technician. Never attempt to adjust or remove it yourself. A yearly visual check costs little to nothing when paired with another service, and catches rust and metal fatigue before a snap.
Fix panels early. Dents from basketballs, bicycles, and the occasional minivan door are common in Arlington garages. A single dented panel replaced now costs $250 to $500. A dent that warps the panel and knocks the door off balance eventually strains the tracks and the springs, and you’re into a $600-plus repair. Early is always cheaper.
Ask for a written price before work starts. Every Fernbrook Garage Doors Fort Worth visit includes a written price delivered before our technician touches a tool. That means no surprises, no negotiation, and no pressure. You’ll know the number, see the work, and decide with a clear head. If you want a free estimate for any garage door service in Arlington, call (682) 354-9140 and a live person will take your call.
FAQs – Garage Door Cost
How much does a garage door spring replacement cost in Arlington?
Spring replacement in Arlington runs $180 to $340 for most single and double doors. The range comes down to torsion versus extension springs, door weight, and whether one or both springs need replacing. Because torsion springs carry dangerous tension, this is not a do-it-yourself repair. Call (682) 354-9140 for an exact quote, and a Fernbrook Garage Doors Fort Worth technician will provide a written price before any work begins.
Is it cheaper to repair or replace a garage door in Arlington?
If the repair total is under $600 and your door is less than 15 years old, repairing is usually the better financial move. A panel replacement at $250 to $500, a new track at $120 to $240, or a spring at $180 to $340 buys you years more life. When the door has significant rust, multiple dented panels, or a frame that’s warped from Arlington’s soil shifts, replacement at $700 to $2,200 makes more sense. Our technicians explain both options and the price of each before any work gets done.
How much does a garage door opener installation cost in Arlington?
Opener installation runs $250 to $550 in Arlington, including labor and standard wiring. The range depends on opener type, rail length, and whether the garage has a dedicated electrical outlet or needs one added. Fernbrook Garage Doors Fort Worth technicians are trained on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor openers. A written price is delivered before installation begins.
Can you fix my garage door the same day in Arlington?
Yes. Fernbrook Garage Doors Fort Worth answers the phone with a live person 24 hours a day, 7 days a week, and same-day service is available across Arlington. A broken spring, snapped cable, or dead opener is usually addressed within the same visit. Call (682) 354-9140 to check availability for your neighborhood, whether you’re near the Entertainment District or south of I-20.
How much does it cost to replace one garage door panel in Arlington?
A single panel replacement in Arlington costs $250 to $500. That includes matching the panel color and design to the existing door, removing the damaged section, and reinstalling. Decorative glass inserts add $120 to $300 if the replacement panel includes them. For an exact price on your door’s panel, call (682) 354-9140 for a free estimate.
What a Fernbrook Garage Doors Fort Worth Visit Looks Like
When you call Fernbrook Garage Doors Fort Worth, a live person answers. No phone tree, no voicemail, no next-day callback. Tell us what’s happening with the door, and we’ll schedule a time that works around kids, pets, and work-from-home schedules. Our technicians are background-checked and uniformed. They arrive with shoe covers and drop cloths, and they ask before moving anything, whether it’s a dog crate by the opener or a stroller leaning against the track.
Before any work starts, you’ll receive a written price. That’s the number, fixed. Our technician explains the repair, the cost, and the time it will take. After the repair, we send a photo of the cleanup. The garage floor looks like it did before we arrived. Every job is backed by the 365-Day Done Right Promise: if it’s not done right, we make it right. No negotiation, no fine print. That’s the home standard for every job we do.
The Fernbrook way of working follows four values we call C.A.R.E.: Clean up like it is our own home. Ask before we move or touch anything. Respect the family’s time and quiet hours. Explain the price before the work. These aren’t slogans. They’re the checklist our technicians follow on every visit, in every Arlington garage, every time.
If your garage door has a problem, whether it’s a slow opener in a house near River Legacy Park or a snapped spring in a two-car near the Parks Mall, call Fernbrook Garage Doors Fort Worth at (682) 354-9140 for a free estimate. We’ll tell you the price before we start, and we’ll leave your home the way we found it: clean, quiet, and working.
Pricing reflects the Arlington market as of 2026. Fernbrook Garage Doors Fort Worth offers free estimates – call (682) 354-9140.
Written by Jesse Calder, Owner at Fernbrook Garage Doors Fort Worth, serving Arlington since 2002.
What Our Customers Say
"Really considerate crew. Our dog is skittish and the tech was patient and calm about it, didn't leave the side door open or anything. Door is quiet now and the price was fair."
- Desmond Clay"Spring broke and the door was stuck. They came out, laid a cloth down so nothing got on the garage, and replaced both springs. Showed me a photo of the finished work before he left."
- Jon Ketterman"Opener replaced and they were so quiet about it while my toddler slept through the whole thing. Swept the garage and even wiped the new rail clean. Kind guy."
- Imogen Routh