Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Fort Worth?
Our Garage Door Installation services in Fort Worth typically run between $700 and $2,200 for a standard single or double door, including the door, tracks, springs, and labor. Most Fort Worth homeowners pay around $1,100 to $1,700 for a mid-range steel door with basic insulation, installed by a local company. Higher-end custom wood doors, full-view glass doors, or insulated double doors in neighborhoods like Tanglewood or Montserrat can push the total toward $3,500 or more.
Fernbrook Garage Doors Fort Worth provides a written price before any work starts, so the number you’re quoted is the number you pay. Call (682) 354-9140 for a free estimate that names the exact door, the exact labor, and the exact total.
Garage Door Installation Cost Breakdown (2026)
Here is what a Fort Worth installation actually costs, line by line. These ranges reflect the local market as of 2026, including what we see across Arlington Heights, Ridglea Hills, Wedgwood, and the fast-growing subdivisions south of Benbrook.
| Line Item | Fort Worth Price Range |
|---|---|
| Single-car steel door (8×7 or 9×7, non-insulated) | $700 – $1,100 |
| Single-car steel door (insulated) | $1,000 – $1,600 |
| Double-car steel door (16×7, non-insulated) | $1,000 – $1,600 |
| Double-car steel door (insulated, 2-layer or 3-layer) | $1,400 – $2,200 |
| Wood or wood-composite door (custom) | $1,800 – $3,500+ |
| Full-view aluminum and glass door | $1,500 – $3,000 |
| Garage door opener installation (belt or chain drive) | $250 – $550 |
| Spring replacement (torsion, both springs) | $180 – $340 |
| Track realignment or replacement | $120 – $240 |
| Old door haul-away and disposal | $50 – $120 |
Three things move the final number up or down in Fort Worth. First, insulation: a non-insulated door is fine for a detached workshop, but an attached garage in Texas heat needs at least a polystyrene core, and most families in Keller or Southlake ask for polyurethane because the garage is a play space or a gym. Second, size and weight: a 16-foot double door with glass panels weighs more, needs heavier springs, and sometimes needs the opening reinforced. Third, the condition of the existing frame: if the wood jamb has rotted from years of Fort Worth rain and humidity, the installer has to repair it before the new tracks go in. We name all of this in the written price before we start, so there is no surprise line at the end.
What Affects Garage Door Installation Pricing in Fort Worth
- Door material and insulation level. Steel is the most common and least expensive. Wood-composite and full-view glass run higher. An insulated door costs $400 to $800 more than a non-insulated one, but it makes the garage usable in July and quiets the door meaningfully, which matters when a kid is sleeping on the other side of that wall.
- Door size and configuration. A standard 16×7 double door is the easiest to price. If the opening is 18 feet wide, or if the door needs to follow a high-lift track to clear a car lift, the labor and hardware both go up.
- Condition of the existing frame and opening. In older Fort Worth neighborhoods like Fairmount or Mistletoe Heights, we regularly find water-damaged jambs or a header that has shifted with the clay soil. Repairing that before hanging the door adds $150 to $400.
- Removal and disposal of the old door. Hauling away a double steel door and its old tracks is $50 to $120. If the old door has broken springs, removing it safely takes more time. We include the removal cost in the written estimate so there is no mystery charge.
- Motor and opener choice. A basic chain-drive opener adds $250 to $350. A belt-drive opener, which is noticeably quieter, adds $350 to $550. Fernbrook technicians are trained on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so we install and set up whatever brand the door is matched with.
- Whether springs are included or already in place. New torsion springs are almost always part of a complete install. If the existing springs were replaced recently, the door can be hung on them, which trims $180 to $340 from the total.
How to Save on Garage Door Installation
There are honest ways to keep the cost down without ending up with a door that fights you every morning. First, buy the standard size: a 16×7 or 9×7 door costs less than a custom width and is usually in stock locally, which also means faster install. Second, keep the existing opener if it still works. A door replacement does not require a new motor. Third, choose a steel door with a basic insulation core rather than a wood-composite or full-glass door; you keep most of the temperature and noise benefit without the premium. Fourth, replace the door and springs at the same time. If the door is old enough to be replaced, the springs are usually near the end of their life anyway. Doing both in one visit is cheaper than scheduling a spring repair six months later, because the labor is already on site.
The single best way to save is to get the real number before you commit. Fernbrook Garage Doors Fort Worth gives you a written price on every visit, before any work starts. There is no estimate fee, no trip charge for a quote, and the number in writing is the number on the invoice. Call (682) 354-9140 and a live person answers, 24 hours a day.
What the Installation Process Looks Like (How It Works)
This is the order a typical Fort Worth installation follows, from first phone call to the final walk-around. The goal is a door that opens quietly, seals against Texas heat, and leaves your garage cleaner than we found it.
Step 1: You call and describe the door
You call (682) 354-9140. A live person answers, not a voicemail tree. We ask about the door width and height, the material you are leaning toward, and whether the opener needs to be replaced too. If you are not sure what size the door is, that is fine; we measure it when we arrive.
Step 2: We measure the opening and inspect the frame
A background-checked, uniformed technician comes to your home and measures the opening, checks the header, jamb, and floor condition, and looks at the existing tracks and springs. In Fort Worth, we pay particular attention to whether the jamb wood has softened from rain splash or whether the slab has moved, because clay soil shifts more here than people expect.
Step 3: You receive a written price
Before any work starts, the technician writes down the door model, the labor, the removal and disposal, and the total. That is the price. If you decide not to proceed, there is no obligation and no charge. If you say yes, the number does not move unless you change the scope.
Step 4: We protect the inside of the home
If the garage is attached to the house, we lay drop cloths on the floor and put shoe covers on before stepping inside. We ask before moving anything: a dog crate, a stroller, a stack of boxes near the track. Tools stay as quiet as they reasonably can, which matters if there is a nap happening upstairs.
Step 5: Removal and installation
The old door, tracks, and springs come down. The new door goes up panel by panel, the tracks are set, the springs are wound to spec, and the opener is installed or reconnected. Technicians are trained on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment.
Step 6: Balance test, safety check, and clean-up photo
The door is tested for balance, the auto-reverse is verified, and the opener limits are set. Then the work area is swept, tools are cleared, and the technician takes a photo of the finished, cleaned space before leaving. That photo is part of the job, not an add-on.
Step 7: You get the 365-Day Done Right Promise
Every Fernbrook job includes the Done Right Promise: if it is not done right, we make it right, for 365 days after the install. No negotiation, no fine print. Jesse Calder stands behind the work, and the promise is stamped on the job.
Garage Door Installation vs. Repair: Which One Makes Sense?
If the door is dented, rusted through, or so noisy that the springs and rollers have worn down together, a New Door Installation often costs less over five years than repairing it piece by piece. A new insulated door in Fort Worth costs $1,000 to $1,600 for a double, while a repair like a panel replacement runs $250 to $500, a roller replacement $110 to $220, and a track realignment $120 to $240. If you need two or three of those in a year, the math tilts toward a new door.
That said, a broken spring alone does not mean you need a new door. Spring repair is $180 to $340, and a $300 spring on a $1,200 door is a good repair. The door matters less than the springs, tracks, and opener combined. Our technician will tell you straight if the old door is worth saving, and the written price applies either way.
For more on the full range of services, see our home page or our guide to Garage Door Installation in Fort Worth.
FAQs – Garage Door Installation Cost
How much does it cost to install a garage door in Fort Worth?
A standard Single Car Door installation in Fort Worth runs $700 to $1,600, and a double door runs $1,000 to $2,200, including labor and basic steel door. A mid-range insulated double door lands around $1,700. Call (682) 354-9140 for a written, no-obligation quote on your specific opening.
Is it cheaper to repair or replace a garage door?
If the repair is a spring at $180 to $340 or a roller set at $110 to $220, repairing is cheaper. If the door itself is dented, rusted, or has a failed panel and the springs and rollers are also worn, replacement at $1,000 to $2,200 often wins over three or four separate repairs. We will give you both prices and let you decide.
How long does garage door installation take in Fort Worth?
Most single and double door installations take one day, usually four to six hours. Custom doors or openings that need frame repair can stretch into a second morning. We confirm the timeline in writing before we start, and we call if anything changes.
Do you need a permit to install a garage door in Fort Worth?
Most residential garage door replacements in Fort Worth do not require a permit, since the work happens on the existing opening without structural changes. If the header or opening needs modification, the city may ask for a permit, and we will flag that before any work begins. The written estimate always notes whether permitting applies.
Can you install a garage door opener at the same time?
Yes. Opener installation runs $250 to $550 depending on whether you choose a chain or belt drive, and it is cheaper to do it during a door install than as a separate visit. Belt drives are noticeably quieter, which matters if a bedroom sits above the garage. Call (682) 354-9140 to price your door and opener together.
Key Takeaways
- Fort Worth garage door installation ranges from $700 to $2,200 for standard steel doors, with most families paying between $1,100 and $1,700.
- Insulation, size, frame condition, and opener choice are the four biggest price drivers.
- Spring repair is $180 to $340, opener install $250 to $550, and track realignment $120 to $240 if you only need a component fixed.
- Fernbrook Garage Doors Fort Worth provides a written price before any work starts, on every visit.
- Every installation includes shoe covers, drop cloths, quiet tools, a clean-up photo, and the 365-Day Done Right Promise.
Pricing reflects the Fort Worth market as of 2026. Fernbrook Garage Doors Fort Worth offers free estimates – call (682) 354-9140.
What Our Customers Say
"Spring broke and the door was stuck. They came out, laid a cloth down so nothing got on the garage, and replaced both springs. Showed me a photo of the finished work before he left."
- Jon Ketterman"Opener replaced and they were so quiet about it while my toddler slept through the whole thing. Swept the garage and even wiped the new rail clean. Kind guy."
- Imogen Routh"The work was careful and clean. There was a short wait for a part on an older opener, so it took two visits. Both techs were polite and respectful of the house. Working great now."
- Gina Marchetti