Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Fort Worth?
Spring replacement in Fort Worth typically costs between $180 and $340 for a standard torsion spring on a single-car garage door. Most homeowners pay around $260 total, including the spring itself, labor, and a safety inspection of the cables and rollers while the technician is there. Two-spring systems, which are common on double doors in neighborhoods like Tanglewood and Park Glen, usually run $300 to $450 because both springs get replaced at the same time.
Those numbers account for parts and labor from a local Fort Worth shop, not a national franchise with a marketing budget folded into every invoice. If you’ve been quoted outside that range, ask what’s included. At Fernbrook, the written price you see before work begins is the price you pay, spring, labor, and cleanup all in one figure.
Key Takeaways:
- Standard torsion spring replacement: $180 – $340
- Double-door dual spring replacement: $300 – $450
- Torsion springs typically last 10,000 – 20,000 cycles, roughly 7 – 12 years for most Fort Worth households
- Extension springs cost less up front but need a safety cable, which adds $40 – $80 to the job
- Same-day service is available across Fort Worth, including Benbrook, White Settlement, and Lake Worth
Spring Replacement Cost Breakdown (2026)
Before we get into what moves the number, here’s what a spring replacement invoice actually looks like in Fort Worth this year. These are the ranges our technicians quote on a daily basis, and they’re based on the spring type, door weight, and how accessible the work area is.
| Service Item | Price Range (Fort Worth, 2026) |
|---|---|
| Torsion spring replacement (single spring) | $180 – $340 |
| Torsion spring replacement (dual spring system) | $300 – $450 |
| Extension spring replacement (pair) | $160 – $280 |
| Safety cable installation (required with extension springs) | $40 – $80 |
| Roller replacement while spring is being done | $110 – $220 |
| Cable replacement (recommended when spring snaps) | $130 – $250 |
| Track realignment (if spring failure bent the track) | $120 – $240 |
The single biggest variable is whether your door uses a torsion spring, which mounts above the closed door on a steel shaft, or extension springs, which stretch along the horizontal tracks on either side. Torsion springs are the standard on homes built after the mid-1990s, and they’re what we install on nearly every replacement in Ridglea, Wedgwood, and Arlington Heights. Extension springs are still around on older Fort Worth homes and some lightweight aluminum doors.
Another factor is spring gauge and length. A 0.225-inch wire torsion spring rated for a 7-foot door costs less than a 0.234-inch spring sized for an 8-foot or heavier insulated door. We don’t stock one generic spring and force it to fit. The spring gets matched to your door’s exact weight, which is why the written estimate specifies the spring dimensions right on the page.
What Affects Spring Replacement Pricing in Fort Worth
No two garages are identical, and Fort Worth’s mix of housing stock, from 1950s brick ranches in Wedgwood to 2010s builds in Walsh, means our pricing has to flex with the home, not against it. Here’s what actually moves the number.
- Spring type and door weight. A double-wide insulated steel door weighs 160 – 200 pounds and needs a heavier spring than a single aluminum door. Heavier springs cost more, and using the wrong one is dangerous, so we take the door’s actual weight before quoting.
- Number of springs. Many double doors run on a two-spring torsion system. When one snaps, the other is at the end of its life too, so replacing both is standard practice. That’s why dual-spring jobs land in the $300 – $450 range rather than the single-spring $180 – $340.
- Cycle rating of the replacement spring. A 10,000-cycle spring is the baseline. A 25,000-cycle spring costs $50 – $90 more but lasts roughly twice as long. If you open your garage four times a day, the upgrade pays for itself. Most families open the door two to three times daily, which means a standard spring lasts about seven to ten years in Fort Worth’s climate.
- Age and condition of surrounding hardware. When a spring snaps, the sudden release of tension often damages the cables or bends the roller brackets. If the cable is frayed, replacing it at the same visit costs $130 – $250 but saves a second service call. We show you the damage and the price before we touch anything.
- How Fort Worth’s heat affects spring life. This is a real cost factor people don’t consider. Texas summer heat cycles, especially in uninsulated garages, cause the spring steel to expand and contract daily. Over a decade, that thermal stress shortens spring life by 15 – 20% compared to a garage in a milder climate. Homes in Benbrook and Crowley with west-facing garage doors see this most.
- Access and workspace conditions. A cramped, cluttered garage slows work and sometimes requires moving stored items. Our techs will ask before moving anything, and we don’t charge extra for it, but a clear 3-foot work zone helps keep the visit quick and safe for everyone, including pets who might wander through.
Torsion vs. Extension Springs: What Fort Worth Homes Have
Most Fort Worth homes built after 1995 use torsion springs. They mount on a metal shaft above the door opening, wind tightly to lift the door, and last longer because they don’t stretch and contract the way extension springs do. When a torsion spring breaks, you’ll hear it: a loud bang like a firecracker, often from inside the house.
Extension springs are the older style, attached to the sides of the door track. They stretch when the door closes and contract when it opens. They’re cheaper to replace, but they require a safety cable threaded through the center to prevent the spring from becoming a projectile if it snaps. Every extension spring replacement we do includes that safety cable, and we won’t install extension springs without one, even if a handyman would. That’s not an upsell. It’s basic safety.
Which spring does your Fort Worth home have?
Stand in your garage and look up. If you see a long, thick spring mounted horizontally above the closed door, that’s torsion. If you see two thinner springs running along the tracks on the left and right sides, those are extension. If you’re not sure, call us and describe what you see. A live person answers, and we can usually tell you over the phone which type you have and what a fair replacement price should be before anyone sets foot on your driveway.
Why Springs Break: The Fort Worth Angle
Springs are rated in cycles, not years. A cycle is one full open and close. Standard springs are rated for 10,000 cycles, which works out to about seven years at three opens per day or ten-plus years for households that park in the driveway and use the garage for storage.
But Fort Worth has a specific problem: heat. Garage interiors in July and August routinely hit 110 – 120 degrees in uninsulated spaces. The spring steel expands in that heat, contracts when the temperature drops overnight, and that thermal cycling gradually weakens the metal’s molecular structure. It’s the same reason roof shingles in Arlington and Mansfield wear faster than ones in Dallas neighborhoods with more tree cover. If your garage faces west and absorbs direct afternoon sun, your springs are working against the elements even when the door isn’t moving.
Humidity is the other quiet culprit. Fort Worth’s spring and early summer humidity gets into the spring’s surface, especially if the protective coating has worn thin, and accelerates rust. A rusty spring is a ticking clock, not a sudden failure. We frequently replace springs in older homes near Lake Worth and the Trinity River corridor that show heavy surface rust but hadn’t yet snapped. Replacing before failure is always cheaper than replacing after, because a snapped spring can yank cables loose and bend rollers on its way out.
The Spring Replacement Process in Fort Worth
Here’s exactly what happens when we replace a spring at a home in Fort Worth, step by step, so you know what to expect from the moment you call.
- Call arrives and a live person answers. You describe the problem. Our dispatcher asks about your door type, spring type if you know it, and schedules a window that works for your family. You’ll know the service fee before we arrive, and it’s applied toward the repair if you proceed.
- Technician inspects and measures. The tech arrives in uniform with shoe covers on before walking inside. They inspect the broken spring, measure the door weight, check the cables, rollers, and track alignment, and write down the spring specs.
- Written price is presented. You get a written estimate with the exact spring dimensions, cycle rating, and total price. No verbal quotes, no “we’ll see when we get in there.” You approve before anything is unwrapped.
- Old spring removed and new spring installed. The old torsion spring is unwound carefully, a process that requires specific tools and training. The new spring is cut to size, installed on the shaft, and wound to the correct tension for your door’s weight.
- Balance and safety test. The tech manually lifts the door to verify it opens smoothly and stays in place halfway open. A properly balanced door should hold position without drifting up or falling closed.
- Lubrication and quiet check. Rollers, hinges, and the spring itself get a light coat of lubricant. If you have a baby napping or dogs that bark at the opener, let the tech know, and we’ll keep the noise to a minimum.
- Cleanup and photo. The work area is swept, any debris is removed, and the tech takes a photo of the finished, clean workspace before leaving. You’ll see it before we go.
The whole visit usually takes 45 to 90 minutes, depending on the spring type and whether cables or rollers need attention while we’re there.
Safety: Why Spring Replacement Isn’t a DIY Job
We’re going to be direct about this because it matters. Garage door torsion springs are under extreme tension, 150 to 250 pounds of torque on a typical Fort Worth residential door. That tension is what lifts the door, and it’s also what makes amateur spring work genuinely dangerous. The winding bars used to adjust torsion springs can slip, and when they do, the spring releases its energy in a fraction of a second. Emergency rooms see hand, wrist, and facial injuries from this exact scenario every year.
We don’t say this to scare anyone into hiring us. We say it because a lot of well-meaning people watch a video and think it looks manageable. It’s not. Spring replacement requires calibrated winding bars, an understanding of the spring’s cycle rating and wire gauge, and experience matching spring tension to door weight. If the tension is even slightly off, the opener motor wears out prematurely or the door slams shut with force. Call a professional. Call us, or call someone else. Just don’t do this one yourself.
How to Save on Spring Replacement
Spring replacement is one of those repairs where the cheapest option is rarely the smartest, but there are legitimate ways to keep the cost reasonable without cutting corners on safety.
Replace both springs when it’s a two-spring door. This sounds like spending more, and it is, up front. But if one spring on a dual system has snapped, the other is typically within months of failing. Replacing both in one visit costs $300 – $450. Replacing one now and the other in four months costs $360 – $680 across two service calls. The math favors doing both at once.
Ask about cycle upgrades. A 25,000-cycle spring costs $50 – $90 more than a standard 10,000-cycle spring but lasts roughly twice as long. If you’re planning to stay in your Fort Worth home for more than five years, it’s the better financial choice.
Coordinate with other small repairs. Rollers, cables, and hinge replacements don’t cost less per item when bundled, but you avoid a second service fee. If your rollers are original to a 2008 door and showing wear, replacing them during the spring visit saves you a future trip charge.
Get a written estimate before any work starts. At Fernbrook, that’s not a negotiation tactic, it’s policy. You see the full price in writing before the tech opens a toolbox. If another shop won’t do that, walk. The only way to save real money on garage door repair is to know the exact number before you’re asked to pay it.
Take advantage of the free estimate.
Call (682) 354-9140 for a free estimate on spring replacement, and we’ll give you a straight number before you commit to anything.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Fort Worth?
Most spring replacements in Fort Worth run $180 – $340 for a single torsion spring and $300 – $450 for a dual-spring system on a double door. The price includes the spring, labor, safety inspection, and cleanup. Call (682) 354-9140 for an exact quote on your door, estimates are free and written.
Should I replace one spring or both?
If your door has two springs and one has snapped, replace both. The second spring has undergone the same number of cycles and the same Fort Worth heat exposure as the first, so it’s near the end of its life. One visit at $300 – $450 beats two visits that could total $360 – $680. We’ll show you the condition of both springs before we recommend anything.
How long does spring replacement take?
Most spring replacements take 45 to 90 minutes once the technician starts. If cables, rollers, or track realignment are also needed, plan for up to two hours. Same-day appointments are available throughout Fort Worth, including Benbrook, Lake Worth, and White Settlement. Call (682) 354-9140 and we’ll tell you the soonest window available.
Is it cheaper to repair or replace the garage door spring?
Spring repair, which usually means replacing the spring, is always cheaper than replacing the door. A spring replacement costs $180 – $450, while a new door starts at $700 – $2,200 installed. Unless the door panels are rusted through or the tracks are bent beyond realignment, a new spring gives you years of additional door life for a fraction of replacement cost.
Why did my garage door spring break in the Texas heat?
Fort Worth’s summer heat cycles, with uninsulated garages hitting 110 degrees and then cooling overnight, cause spring steel to expand and contract daily. Over seven to ten years, that thermal stress weakens the metal until it snaps. West-facing garages are most affected. A standard spring has a 10,000-cycle lifespan, and Fort Worth’s climate tends to shorten that slightly compared to milder regions. A higher-cycle spring can offset the heat wear. Call (682) 354-9140 and we’ll tell you what’s on your door and what rating it has.
About Fernbrook Garage Doors Fort Worth
Fernbrook Garage Doors Fort Worth is an independently owned and operated member of the Cedarwell family of businesses, the network that has set the standard for garage door care since 2002. Led by Jesse Calder, our Fort Worth team serves families across the city, from homeowners in Ridglea and Tanglewood to newer developments in Walsh and along the Chisholm Trail corridor.
Every Fernbrook visit includes the Cedarwell Care Promise: a written price before any work begins, shoe covers on hardwood and carpet, drop cloths on tile, quiet tools when the kids are asleep, pet-safe products where there’s a choice, and a photo of the cleaned work area before the technician leaves. We ask before we move a dog crate, a bicycle, or anything else that belongs to your family, because it’s your garage, not just a job site.
Our technicians train on eight major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so the spring going onto your door is matched to your system, not adapted to it. And every job carries the 365-Day Done Right Promise: if it’s not done right, we make it right. No forms, no pressuring questions, no negotiation. It’s stamped on every invoice, and it means what it says.
Call for a Free Estimate in Fort Worth
If your garage door spring snapped, or you suspect it’s close, or you just want to know what condition your springs are in before the next Texas summer hits, call Fernbrook Garage Doors Fort Worth at (682) 354-9140. A live person answers, 24 hours a day, seven days a week. No voicemail trees, no automated systems, no callbacks tomorrow. You’ll speak to someone who can schedule a visit and give you straight answers about pricing.
We serve the entire Fort Worth area, including Benbrook, White Settlement, Lake Worth, Saginaw, Haltom City, Richland Hills, and the surrounding Tarrant County neighborhoods. When a spring breaks on a Saturday morning or a Tuesday night, you shouldn’t have to wait until Monday. Call us and we’ll get someone out.
Pricing reflects the Fort Worth market as of 2026. Fernbrook Garage Doors Fort Worth offers free estimates – call (682) 354-9140.
Written by Jesse Calder, Owner at Fernbrook Garage Doors Fort Worth, serving Fort Worth and Tarrant County since 2002.
What Our Customers Say
"Spring broke and the door was stuck. They came out, laid a cloth down so nothing got on the garage, and replaced both springs. Showed me a photo of the finished work before he left."
- Jon Ketterman"Opener replaced and they were so quiet about it while my toddler slept through the whole thing. Swept the garage and even wiped the new rail clean. Kind guy."
- Imogen Routh"The work was careful and clean. There was a short wait for a part on an older opener, so it took two visits. Both techs were polite and respectful of the house. Working great now."
- Gina Marchetti